Stay Strong GelColor Base Coat creates a durable foundation for OPI GelColor gel nail polish.
-
-
- Properly prep nail and cuticle for optimal adhesion, then apply one coat of Bond-Aid pH Balancing Agent.
- Shake Stay Strong GelColor Base Coat vigorously then apply an ultra thin coat -- less is more! Cap the free edge to prevent chipping. Cure 30 seconds in the Dual Cure LED Light.
- Shake gel nail polish shade of choice to thoroughly mix pigment, this will allow even color application and avoid patchiness.
- Apply a very thin coat of color and cure for 30 seconds in the Dual Cure LED Light.
- Apply a second very thin coat of gel nail polish. Cap the free edge again. The second coat will provide true color payoff. Cure 30 seconds in the Dual Cure LED Light.
- Shake GelColor Top Coat vigorously for 1 minute to thoroughly mix. Apply a very thin coat and cap the free edge to seal in color. Cure 30 seconds in the Dual Cure LED Light.
- Remove tacky layer on Top Coat with an Expert Touch Nail Wipe saturated with N.A.S. 99.
- Apply a drop of ProSpa Nail & Cuticle Oil and massage into cuticles.
-
- Provides 61% more strength to the natural nail.
- Provides adhesion for up to 3 weeks of wear and stay-true color.
- Soak-off removal.
- Fully cures in 30 seconds under OPI LED Light, so nails are 100% dry and smudge-proof immediately after gel manicure service.
- Lightweight feel on fingers.
- Shorter brush provides a smooth, even application without applying too much product.
-
Di-HEMA Trimethylhexyl Dicarbamate, Ethyl Acetate, Alcohol Denat./SD Alcohol 40-B, Butyl Acetate, HEMA, Hydroxypropyl Methacrylate, Heptane, Nitrocellulose, Acrylic Acid, Tosylamide/Epoxy Resin, Trimethylbenzoyl Diphenylphosphine Oxide, Isobornyl Methacrylate, Isopropyl Alcohol, Trimethyl Pentanyl Diisobutyrate, Polyvinyl Butyral, Camphor, BHT, Calcium Pantothenate, Panthenol, Tocopheryl Acetate, Benzophenone-1, Bis-Trimethylbenzoyl Phenylphosphine Oxide, p-Hydroxyanisole, Hydroquinone, CI 60725 (Violet 2).