Connect the charger to the power supply to begin charging lamp.
The Red Light indicates the lamp is on, the Blue Lights indicate charge level.
When the lights are blinking, the lamp is charging.
The lights will appear solid Blue when the lamp is charged.
You can use the lamp while charging; charging time is 2 hours.
Automatic Sensor Mode:
When hand is placed into the lamp, it will begin working.
When the hand is removed, the lamp will stop working.
Manual Mode:
To set the curing time, press one of the individual buttons: 10s, 30s or 60s. 'S' refers to seconds.
The countdown time will appear and the lamp will shut off when complete.
Additional Buttons:
30X60S Low Power:
Low Power is used for gels or people who are sensitive to avoid heat spikes during curing.
The lamp will start out at 30% of power and after 30 seconds automatically increases another 30%, finally reaching the full curing power for a slower cure.
90S High Power
High Power should be used for highly pigmented gels, such as black and white or sculpting with gel when doing thicker applications.
Sleep Mode
When the lamp is not in use for 10 minutes it automatically goes to sleep to protect the battery charge. The lamp can be reactivated by pressing the 90S button.