Gelish® Touch LED takes application speed to another level. Integrate fast, even flash curing into your services with focused LED Beam technology to finish full sets in 20 minutes or less or use for single gel curing.

1. Switch the power switch to ON to use the Touch LED.
2. Touch the metal ring of the barrel of the LED Touch to activate the light.
3. The Touch LED light will automatically turn off after 30 seconds or touch the metal ring again to turn the light off.
4. Switch the power switch to OFF to power down the Touch LED.
5. Tip: When the power indicator light becomes dim, the Touch LED must be recharged. The Touch LED can be used when not plugged in if charged.

Safety:

1. UNPLUG LED LIGHT WHEN NOT BEING USED.
2. DO NOT USE LED LIGHT IN OR AROUND WATER.
3. DO NOT LOOK DIRECTLY INTO LED LIGHT.
4. CERTAIN COSMETICS OR PRESCRIPTION LOTIONS CAN CAUSE SENSITIVITY TO LED LIGHT, DISCONTINUE USE IMMEDIATELY.
5. DO NOT OVEREXPOSE THE NAILS OR SKIN TO THE LED LIGHT.
6. DO NOT USE WITH GELS THAT ARE NOT FORMULATED TO CURE IN LED LIGHT. IT CAN RESULT IN SEVERE CHEMICAL BURN.

• Touch activated.
• Rechargable.
• Ergonomic 360 freedom.
• 3 watts.
• 30 second cure.
• Battery charge indicator.
• 24 hours of battery.
• USB-C cable included.